2000 Expedition custom

CASSIOPEIA

$700,000

Coden, AL, US

2 Staterooms
1 Heads
1 Engines

NEW LISTING

PRELIMARY MORE DETAILS TO FOLLOW

TENDERS ARE NOT INCLUDED WITH THE SALE OF THE BOAT, THEY CAN BE PURCHASED SEPERATELY.

This Vessel Is An All Welded Steel Hull Construction With Aluminum Pilothouse, Twin Screw, Diesel Powered, Raised Foredeck, Pilothouse Expedition Motor Yacht. Has A Displacement Hull With Raked Stem, Tri-keel Design With Chine Bottom And Square Stern With Integral Swim Platform. Vessel Is Utilized As A Crusing Yacht For Recreational Purposes.

Vessel Is Powered By Twin John Deere Model 6068TFM75, In-line 6 Cylinder, 4 Cycle, Turbocharged And Aftercooled Diesel Engines.

This Vessel Was Built At Williams Boat Works In Coden, Alabama.

Disclaimer

Galati Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by A & M Yacht Sales, Inc.

Last updated Nov 18th, 2024
6 views

Specifications

Quick Specs

Builder:Expedition

Country: US

Category: Power

Model: custom

Model Year: 2000

Accommodations

Cabins: 2

Heads: 1

Sleeps: 6

Hull Information

Hull Material: Steel

Dimensions

Length: 60 ' (18.29M)

Draft: 5 ft' (1M)

Beam: 17.33 ft' (5M)

Speed/Weight/Capacity

Fuel Capacity: 3000 G. 11356 L.

Water Capacity: 1000 G. 3785 L.

Holding Tank: 150 G. 567 L.

Engines

Engine 1

Engine Make: JOHN DEERE

Engine Model: 6068TFM75

Engine Type: Inboard

Power HP: 0

Fuel Type: diesel

Engine Hours: 0

Details

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

FUEL TANKS

6 - Welded steel construction fuel tanks, 3,000 gallons reported total capacity, which are integral with the hull and located as follows:

1 - TRANSVERSE INNERBOTTOM TANK BENEATH MASTER STATEROOM.

1 - TRANSVERSE INNERBOTTOM TANK BENEATH AFT MECHANICAL ROOM.

1 - EACH PORT AND STARBOARD KEEL TANKS.

FUEL TANKS AND SYSTEM FITTED WITH SUITABLE STAINLESS STEEL FILL PIPES, VALVES AND VENT CHECKS.

HULL COMPARTMENTATION

VESSEL IS FITTED WITH THREE TRANSVERSE WATERTIGHT BULKHEADS INTO THE FOLLOWING COMPARTMENTS FROM BOW TO STERN: FIRST IS THE BOW COLLISION COMPARTMENT/CHAIN LOCKER. NEXT COMPARTMENT AFT HOUSES THE CREW QUARTERS, WATER CLOSETS (BATHROOMS), MASTER STATEROOM AND MECHANICAL ROOM.

MISCELLANEOUS ADDITIONAL EQUIPMENT

2 - POLY CONSTRUCTION DOCK/DECK BOXES AFT ON BOAT DECK.

1 - GENERIC POLY CONSTRUCTION DOCK/DECK BOX.

4 - C & M MARINE PRODUCTS FIBERGLASS DOCK /DECK BOXES.

2 - MECHANICS TOOL CHESTS IN AFT MECHANICAL ROOM.

1 HOME 120 VAC DEHUMIDIFIER IN ENGINE ROOM.

1 - ALUMINUM PIPE SWIM LADDER.

ELECTRICAL

VESSEL IS WIRED WITH 12/3 AWG BOAT CABLE WITH COMMERCIAL AND VAPOR PROOF MARINE TYPE FIXTURES. THE ELECTRICAL SYSTEM IS 12VDC AND 120/240 VAC. OVERLOAD PROTECTION IS PROVIDED BY CIRCUIT BREAKERS IN ALL VERY WELL LABELED SQUARE D MANUFACTURED PANEL BOARDS THROUGHOUT VESSEL OR DC FUSE BLOCKS BENEATH PILOTHOUSE CONSTOLE. GENERATOR PANEL IS HOUSED WITHIN THEAFT MECHANICAL ROOM. ISOLATION TRANSORMERS ARE LOCATED PORT AND STARBOARD IN ENGINE ROOM. 12VDC BATTERY BANKS ARE HOUSED IN SUITABLE POLY BOXES WITH COVERS PORT AND STARBOARD, FORE AND AFT IN ENGINE ROOM WITH ADJACENT BLUE SEA SYSTEMS BATTERY SWITCHES CONSISTING OF 2 DURACELL SIZE 8D AND TWO DURACELL GROUP 24, 12VDC BATTERIES.

ELECTRICAL ACCESSORIES

1 - QUALITY POWER PRODUCTS, LTD. 100/50 AMP 240 VAC, 1-PHASE GENERATOR PANEL.

2- MARINCO 50 AMPERE 125/250 VAC SHORE POWER CONNECTORS.

1 - HUBBELL PHONE/TV SHORE CONNECTOR.

1 - XANTREX 3000 WATT INVERTER/CHARGER.

4 - 500 WATT 120 VAC QUARTZ DECK LIGHTS.

CANVAS/AWNINGS

PILOTHOUSE WINDOWS FITTED WITH REFLECTIVE PANELS.

DECKHOUSE WINDOWS FITTED WITH SUITABLE SHADES.

CANVAS SEARCHLIGHT COVER.

CANVAS EXTERIOR SPEAKER COVERS.

Call

Contact